Skip Navigation Website Accessibility

Hours: Mon-Thu 10:00am - 8pm Fri-Sat 10:00am - 6pm

ToneWood Amp Solo


Add to Cart


The ToneWoodAmp allows you to play acoustic guitar with different effects, UNPLUGGED – with the effects emanating organically from the guitar’s sound hole and the body itself.


Similar to the way the strings excite the top of the guitar to produce sound, ToneWoodAmpexcites the back of the instrument, producing sound waves of effects such as reverb, echo, delay, tremolo and more, which interact with the natural sound of the guitar itself.


The ToneWoodAmp is also a multi-effect processor which you can connect with any Amp/PA system and is also an iDevice interface allowing you to experiment with audio and MIDI apps.

guitar-player-coolest-gizmo1 accoustic-guitar-cutting-edge guitar-world-revolutionary

Thanks for checking out The Acoustic Shoppe's Reverb store. We are one of the nations largest authorized Eastman dealers, as well as a full line Huss & Dalton dealer. All new instruments & accessories come with their full manufacturers warranty & every instrument goes through our shop to assure that they are player ready. With 25+ years experience in the acoustic music industry as The Chapmans, our goal is to provide you with the best costumer experience possible so we can be your music store for life. Voted NAMM Top 100 Dealer in 2015, 2016, 2017, 2018 & Top 3 Emerging Dealer in '17 & '18.

**Photos are Acoustic Shoppe Stock images and may not be of the actual instrument. If you would like to see pictures of this listing, please contact us. We would be glad to provide them for you.


The ToneWoodAmp uses a clever combination of powerful DSP (digital signal processor) and surface exciter. Attached to the back of your acoustic guitar, the device vibrates the back of your instrument, producing sound effects such as reverb, echo, delay, tremolo and more, which interact with the natural sound of your guitar. The result is a unique soundscape coming from within the body of the guitar itself, while still maintaining the guitar’s natural beauty, original tone, and untethered portability.


ToneWoodAmp Amp Less Experience

General Specs of the ToneWoodAmp

Inputs and outputs: the TWAmp has one 1/4? input (from guitar), one 1/4? output (to amp or P.A.) and one 1/8? TRRS I/O for iDevice (and other devices).

Effects: Built-in 8 effects: 3 types of Reverb, Delay, Tremolo/Delay, Leslie style Tremolo, Auto-Wah and Overdrive. Chorus is under development.

Effect parameters: each effect has three parameters. For example, the delay/echo effect has the following: Speed, Regenerate and Reverb.

Save/recall of effect settings: there are 10 memory locations for each effect where you can store/recall favorite effect settings.

Power: 3 AA batteries hold for an average of 8 hours.

ToneWoodAmp Takes 5 Minutes to Install


The initial installation and setup of the ToneWoodAmp is fast and easy, it requires no tools, and has no permanent impact on your guitar. There is one part and very few steps to follow.

About the “X-Brace”:

The “X-Brace” is a set of four magnets connected together as a four “legs” unit.

To instal the X-Brace follow the following easy steps:

* Loosen your string for easy access to and through the soundhole

* Peel off the magnent’s protective layer and insert the X-Brace through the soundhole

* Set the X-Brace and press firmly for 10 seconds

* Tighten your strings and tune your guitar

* Attach the ToneWoodAmp to the back


Once the X-Brace is installed inside the guitar, detaching and attaching the ToneWoodAmp is a snap.


Usage of the ToneWoodAmp

ToneWoodAmp use case one

Amazing Effects!

Add effects to your living room guitar without having to connect to an external amp.
ToneWoodAmp use case two

Make Practice Fun!

Use while practicing to make it a more fun experience.
ToneWoodAmp use case three


Write and compose with the ToneWoodAmp and get inspired by the new voicing and soundscapes you can create.
ToneWoodAmp use case four

New Tones

Develop new tones and voicings for your guitar.
ToneWoodAmp use case five

Travel Companinion

Miss your amp when traveling? The ToneWoodAmp is your new perfect companion for your traveling acoustic guitar.
ToneWoodAmp use case six

Experiment with Apps!

Experiment with apps such as Virtual MIDI, guitar effects and other music apps (requires iDevice and apps).
ToneWoodAmp use case seven

Multi-Effect Processor

Use as an acoustic multi-effect processor to connect with a P.A. system.
ToneWoodAmp use case eight

Amazing Solo Performance

Boost your solo performance when there is an unplugged house concert or live plugged stage performance.


Contact Us
  • 417-720-1223
  • 1913 E Seminole St.
    Springfield, MO 65804
  • Mon - Thu 10:00a - 8p
    Fri-Sat: 10:00a - 6p
Find Us